In In DLN, the highest physical limits of mechanical,

In DLN, two microstructures (hydrogenated carbon and
oxygenated Silicon) are interpenetrating two each other and thus internal
stress is decreased and adhesion property is increased and hence this composite
has improved adhesion to almost all kind of substrate. It
has immense application in the filed of biomedical implants. This can be used
as biomedical sensors as well. DLC coatings can be used as protective wear resistant
coating in joint prostheses. 2 already deposited DLN coatings by
PECVD method over various substrate like SS 316 L, glass, Si(100), ceramic(Al2O3)
ultra high molecular weight polyethylene (UHMWPE), Co–Cr alloy, Ti6Al4V alloy,
etc. Most of these materials have been in use as
load-bearing orthopedic implants, like hip joint, knee joint, etc 72. As its coefficient of friction is very less, DLN
films can be used as wear resistant coating. As it is anticorrosive, this
composite can be used as anti-corossive coating on wrist watches , brass made
show pieces etc to enhance their longibity. Mechanical properties of DLN
material along with the low refractive index and higher transparency compared
with other thin film material makes DLN an attractive option for choosing DLN
as a protective coating 50. In DLN, the highest physical limits of
mechanical, electronic and “sensor” properties can be combined and thus smart
future material can be constructed 1. T.S. Santra et al reported DLN films
have their unique number of structural, mechanical and tribological properties
which are quite similar with MEMS material. Due to these unique properties of
DLN films, these are highly applicable in MEMS/NEMS devices. The high
mechanical properties of DLN films make it applicable for design of high
frequency resonator and comb deriver for sensing and actuating applications.
DLN film is a biocompatible material  So,
we can use DLN films for detection of bio-molecules in biological research and
disease diagnosis 17.  Due to its
infrared transparency, this can be used as anti-reflective coating on solar
cell, glass etc. Sukhendu Jana et al 73 reported
diamond-like nanocomposite film
behaves as a dielectric medium. DLN thin film based MIM capacitor is
applicable for high capacitance and high frequency operation. Thus DLN thin film based MIM capacitor has great
potential for use in electrical/ electronic circuit. It has already been
reported that DLC are used for optical wave guiding sensing systems 74,
transistors 75 and high tempeature sensing upto 600 0C 76. As
DLN is a improved version of DLC, So, there is a possibility to use DLN for the
same purpose. Diamond film  grown on p-Si
substrates using MWPECVD technique 77-79 may be used as  antenna for harsh environment in aviation  application.

x

Hi!
I'm Alfred!

Would you like to get a custom essay? How about receiving a customized one?

Check it out